Hydraulic Desktop Power Sockets / Pop Up Electrical Outlet With USB / HDMI / VGA Bottom Connection

Conference Table Hydraulic Pop Up Desktop Power Sockets with Bottom Connection HDMI VGA USB

Introduction:

As the requirement of conference room become more and more higher. Luxurious and convenient conference equipment is necessary. Tabletop mount hidden pop up power socket box is the one of conference equipment for AV solutions. 

BP series Desktop Socket is designed as a table top socket box with multi-functional modules. Tabletop Socket is built in a pneumatic pressure spring pole, which can pop up the sockets with 45 degree. Works with the aluminum alloy connection plate.

Application:

Table pop up socket is mainly used in advanced office, hotel, residence, training room, lecture room and so on.

Feature:

1. Humanization design of 45 degree pop up angle, the plug can be connected easily and convenience

2. Socket connectors can be changed according to customer’s requirement

3. Save more space, and make the office environment durable and beautiful

4. The surface panel is designed for round corner, prevent desktop scratch and cause injury to people

5. Supply screws and mounting accessories

6. With a strong carton package and waterproof plastic film

7. Desktop Socket by pneumatic pressure gas pole quietly

8. The aluminum alloy plate of office socket box is 5mm

9. All the socket connectors and sockets is direct connection

Specification:

Installazion:

●Step A

Cut a hole through the table board under the size and sharp.

●Step B

Insert the panel through the hole and adjust the position to fix the table board properly

●Step C

Put the fasteners into the notches of the frame and then fix them with screws at the bottom of the table board.

●Step D

Fix the cables with clamps and screws, a proper cable length should be extended for the panel movement.

●Step E

Connect the cable to the related equipments.

Cautions

●Keep the product out of the reach of children

●Please read carefully this manual to avoid any incorrect operation

●All the devices connecting to the outlet must meet the safety requirements

●There is no over current protection in the outlet, an additional 10A fuse should be installed to ●the power supply by the installer.

●Do not break any accessories and connection cables.

●The panel should be installed by professional technician

●Be cautious to the sharp edge of panel to avoid any possible cut damage

●Keep dry, to be ventilated and keep away from humid, dust and heat.

●Check carefully the power voltage and frequency before installation.

●Must make sure it is power off before cleaning the outlet.

●Clean with dried soft fabric. Do not use any depurative for cleaning.

●Make sure to check the cables regularly.

Product Pictures:

Packing & Shipment: